Commercial establishments are designed and constructed in different ways to maximize the revenue of businesses operating in them. You might spend a fortune on your décor and furniture and forget one aspect that makes a significant difference in your business’s look. This is the condition of your carpets.
One of the key aspects that determine your carpet’s condition is its cleanliness. If you have dirt deeply embedded in your carpets, the fibers will be flat and the carpet will not look as good as it should.
In-house vacuuming is not enough. Expert carpet cleaners in London are your go-to option for cleaning your carpets efficiently and keeping them in top condition. One of the best choices for commercial premises is the use of low moisture cleaning methods. These eliminate the rapid accumulation of dirt in your carpets, have fast drying times, and promote healthy indoor air quality.
Moreover, this cleaning option is eco-friendly since it does not use high amounts of VOCs. The following are the low moisture techniques used for cleaning carpets:
Dry Compound Cleaning
This method suffices for restorative and interim cleaning. In dry compound cleaning, absorbent compounds containing solvents or mixtures are distributed and then applied to your carpet fibers and left to sit for about half an hour. After this, a pile lift or vacuuming procedure is used to remove the compound and all the dirt it has collected. No moisture is used in dry compound cleaning, making it ideal for schools and businesses that do not want downtime.
Foam Cleaning
This technique uses minimal moisture for the restorative cleaning of your carpets. The carpets are first vacuumed and then a dense foam is applied using mechanical aeration and then distributed using a mechanical brush. The type of vacuum used in this case is one incorporated with foam cleaning equipment, which will extract the foam residue along with the suspended dirt from your carpets.
Encapsulation
Here, a low-residue cleaning product will be applied on your carpets using sprayers, and then agitated into the carpet fibers using a rotational brush machine. There are new machines nowadays, which combine all the steps of encapsulation and cut back on the time and cost needed to clean your carpets. Most experts will vacuum the carpets afterward to minimize the risk of the cleaning product attracting dirt into the fibers.
Spin Bonnet Cleaning
This closely resembles the dry cleaning technique. A cleaning compound is applied to your carpet fibers and then agitated to lift the dirt from the fibers. After this, an absorbent pad, which is attached to a rotating machine, will be used to lift the cleaning compound and dirt from your carpets. In doing so, the debris is transferred on the bonnet pad, which can be changed periodically depending on the state of your carpets. H however, spin bonnet cleaning does not lift deeply embedded dirt.
Commercial carpet cleaning has long been associated with wet carpets and costly business downtime. The above techniques, however, eliminate the need to halt operations for a few hours to clean your carpets. They are your best bet for getting your carpets clean and prim without having to close your shop.
